To bisect the garden into two equal areas of grass is at once to introduce symmetry. The artist well knows how fatal it is to a good symbolic effect to allot equal spaces to sky and landscape, the two cases are parallel.

The idea of a lawn for games is rarely realizable for want of space, and the grass plot therefore, should be treated with other purposes in view. Its functions are more closely related to the flowers and general picture. It affords welcome relief to the eye, and by contrast enhances the value of the color effect obtainable with the flowers.

Moreover, its surface presents a cool, soft, and welcome tread, and a place to laze upon and enjoy the garden view. If you already have a nice collection of outdoor statuary, a wall water fountain or garden water feature can add to the vista.

It is that part of the garden in which we may plant a few trees for shade, without fear that their shadows and hungry roots will work havoc with the flowers. The grass plot should never be isolated by surrounding it on all sides with gravel, which is done too often in gardens. Let one or more of the sides join a border, where grass and flowers would come into combination. You can even let the border thrust out an extension into the grass.

Beware of fretting your principal grass plot into a thing of ragged outline by overdoing this procedure, and do not pierce it with a multitude of little beds. Remember, the simpler in shape your grass plot, the less difficulty you will experience in mowing it and keeping it trim and neat.

Beds in grass are best grouped at one or two points, and the components of the group should be shaped so as to produce unity of effect. By doing this you are able to introduce garden statuary, patio statuary, or even something like an old world wall fountains without straying away parallel garden. It is generally better that the outlines of the group should preserve a parallelism with those of the grass plot, as this ensures a more harmonious effect.

It is clear that the gardener should arrange, as far as possible, that the principal shadows in his garden should fall upon the grass, where they will be welcome to shade, and by planting them with bulbs, it will secure a charming feature in spring and early summer. Another plan is to utilize the space for a sunken rock garden, and yet another is to make a central group of beds upon it, which in the case of a square space becomes an attractive secondary focus.

An important point is to give proper access to all grass spaces. This implies that the borders should not mess with the most natural way of reaching the grass. Neglect of this consideration may tempt those who use the garden to skip over the borders, with consequences to the plants which do not need to be stated explicitly.

It is good to provide means of access to the grass at all points from which it is likely to be approached, by bringing it up to the path at those points. This is done by restraining the border by approximately three or four feet at its end, or by breaking through it at some point in its length.

When a grass plot is used solely as a background for a group of beds, there should be a wide border at the edges. Whatever the shape of the beds, the spaces between the two beds should have a sufficient width to ensure no difficulty in mowing.

In dealing with grass spaces of irregular outline, such as those where the paths are winding, you should take into account the outline of the grass space when placing the beds. For instance, a square group of beds set in a curved promontory would produce a discordant note.

It is better to adapt the shape of the group to the space in which it is set. If you decide not to do this, it would become difficult to install garden statues, large fountains, or anything else related to outdoor statuary.

There is no need to make the grass level if the ground has a natural slope. On the contrary, sloping ground greatly assists drainage, and ensures that puddles shall not lodge on the surface, which, would inevitably occur on a flat area.

A well cared for yard looks wonderful. The beautiful flowers that are planted along the fence line look outstanding and the lawn is well groomed, but something still seems to be missing. What more can you do to make your yard look even more cozy and inviting? Why not consider decorating your yard a bit by adding a few colorful garden stakes to the small herb garden you have planted there in the corner? Garden stakes are available in a wide variety of sizes, styles and colors and are the perfect way to add a bit of whimsy to your home and garden. Garden stakes can also be used indoors to spruce up a houseplant or can also be ideal for giving new life to your balcony or patio. You can find garden stakes that are full of color, fun and motion.

Another charming decoration for yard are lawn ornaments. Again, lawn ornaments like garden stakes come in a wide array of sizes, shapes, colors and are made out of wood, metal, clay, or plastic. Lawn ornaments can come in human form, animal form, as fountains, bird baths, bird houses and garden gnomes to name a few. You can easily express yourself by choosing a lawn ornament that tells visitors what you are all about. Perhaps you collect turtle figurines. Then adding a few turtle-inspired  lawn ornaments and placing them around your yard is a great way to expand your collection and surround yourself with what you love.

We all love our yards and gardens and there is no better way to add a bit of charm to the  utside of the house than by adding some garden art to the mix. Nearly every well kept and  nice garden includes some form of garden art, be it a fountain, a pink flamingo or a few spinning garden stakes lining the walkway. It’s fun, it’s delightful and best of all it does not have to cost an arm and an leg to decorate your yard.

If you’re ’suffering’ from high monthly household payments and you are currently researching the subject of how to keep electric bill low then you must read the following – you are sure to be intrigued. Let’s start with the fact that you can create all the electricity your family could ever need, without outside assistance, and without spending a fortune – too good to be true? Just listen to the facts and get the full story.

The average person buys all of their energy from the electric company; they are then burdened by bills and often have to economize elsewhere in order to have such a household staple. On the other hand, there are people who decided that enough is enough, they were fed up with expensive and unnecessary power bills – what they wanted is absolutely free and unlimited power supply that would supply all their power requirements.

Before you get more information about how to keep electric bill low it is important that you’ll know that you can join these people, indeed, you can start reaping the rewards of your free energy source in no time – don’t you want to join the free energy club? You no doubt get a ‘charge’ out of free electricity and want more information as to what this all entails; it’s really a very easy process of converting renewable energy sources that are right ‘under our nose’ into free electricity. Can you imagine that virtually anyone can create their very own solar and/or wind energy system in almost no time on their own property?

Even if it happens to be that you are in the middle of a web research on how to keep electric bill low you now know what a real possibility it is to build your own power supply system that can actually decrease your electric bills by as much as 100%! Perhaps this sounds like too much to take on all by yourself; i’m pleased to report that this is no longer the case – leading the way is an expert in harnessing the unlimited power of the sun and wind who is willing to share his vast experience to benefit all of us.

Enjoy FREE and UNLIMITED electricity…forever!



Watch this SHOCKING Video!



Visit: EasyFreeEnergy.com

Article Source:http://www.articlesbase.com/diy-articles/how-to-keep-electric-bill-low-did-you-hear-about-this–1090312.html

If you’re ’suffering’ from high monthly household payments and you are interested in finding out about cutting an increase in electricity cost then let us share some information with you – you are sure to find it of interest. First of all, how about being able to produce all the electricity your family could ever need, single handedly and at very little cost – sound a bit unlikely? I suggest you read on and find out the answer.

The average person buys all of their energy from the electric company; they then pay their monthly bills while carefully counting each and every cent they spend on this basic necessity. But then there are those who found another way of doing things, since they didn’t want to be saddled with all those bills – they discovered a way of generating their own power – as much as they want – to supply their entire family’s needs.

So while investigating more about cutting an increase in electricity cost you have to realize that you too can take advantage of this money-saving system; in just a few short days, you can start enjoying your new, no-cost power supply – does free, clean energy sound appealing to you? I hope that i have now managed to pique your interest on what this is really all about; it’s really a very easy process of transforming the energy that is found all around is into free and usable electricity. Do you know that it’s possible for anybody to construct a solar and wind energy generating system of their own in several days on their own property?

Even if you are only interested about cutting an increase in electricity cost you should understand that you can quite easily build your own power supply system that will save you big money right away and for the rest of your life. Perhaps this sounds like too much to take on all by yourself; just recently the whole thing has gotten much more accessible – it seems that there is one renewable energy expert and a pioneer in this field who is willing to share his vast experience to benefit all of us.

Enjoy FREE and UNLIMITED electricity…forever!



Watch this SHOCKING Video!



Visit: EasyFreeEnergy.com

Article Source:http://www.articlesbase.com/diy-articles/increase-in-electricity-cost-did-you-hear-about-this–1089171.html

If you’re looking for ways to economize and you’re starting to wonder about cutting an electric bill by 80% then you must read the following article – it is of great financial importance to you. Electric companies charge most of us high prices for heat and lights; however, that doesn’t have to be the case. a breakthrough method can provide you with all the electricity you need without spending a lot of time and money.

“too good to be true,” you might be thinking, but believe me – people are now able to come up with enough electricity for an entire family with a simple operation, and get rid of their dependence on the good old power company. Just imagine – no more monthly bills, deposits of any kind, only an abundant energy supply to provide all the electricity you need.

If you’re ready to do a google search for information on cutting an electric bill by 80%; i want you to know, for both financial and environmental reasons, that you can get on board with a system used by a large number of americans and people from all over the world that gives you the power to seriously decrease your power bill if not eliminate it once and for all! So this sounds great, and now you want to know what kind of a ‘magic trick’ this is; you just need to use what mother nature has provided – taking natural energy sources and transforming them into electricity, on your own property in almost no time and with no outside help required. And the best news about it is that everyone is capable of this, although you probably aren’t an electrician or a technician and even if, as with most people, you’re no thomas edison.

As you continue to research the topic of cutting an electric bill by 80%, prepare yourself for another amazing fact – with this new energy solution, you are making a difference in the future of the planet and as an added incentive, with tax credits and by selling extra power to your electric company, you can save money, and even make money! Take a moment to see yourself powering your appliances, including heaters and air conditioners, free from worry about payments, while at the same time getting paid for it. Still doubtful? You have nothing to lose – check it for yourself; I’ll willing to bet it will make you want to start generating your own energy immediately.

Enjoy FREE and UNLIMITED electricity…forever!



Watch this SHOCKING Video!



Visit: EasyFreeEnergy.com

Article Source:http://www.articlesbase.com/diy-articles/electric-bill-by-state–dont-skip-this-information–1086872.html

Roller shades can help control light and heat from entering or exiting a room. There are three main types of environmentally friendly roller shades, blackout or sleep window shades, light filtering roller shades, and solar window shades. These can be functional or decorative, or both.

Blackout, or sleep roller shades are made of thicker fabric or vinyl coated materials or they are made of wood. Wood roller shades offer the greatest insulation and moisture control, and cost the most. The lightweight vinyl coated fabric window shades that are dark are also used for blackout window shades. The roller shades can be adjusted to allow any amount of light into a room, or to fully darken the room for sleeping. They are great for night shift workers, the elderly, and children, who all need to have darkened rooms for better sleep conditions.

The light filtering roller shades are translucent, allowing light into a room, and many are very light colored or decorator fabrics. These provide privacy and light control, but do not darken the room. They fit well into many decorator schemes, and make rooms look lighter and friendlier.

Solar window shades are precision screen window shades, which are light controlling, yet you can see the outdoors view through them, as with regular screening materials. They cut glare, and give some privacy, but do not eliminate the view as the other two styles do.

All the window shades can fit inside the window frame or outside it, depending on how much light control the homeowner desires, and what fits best with room decor. All have a steel headrail system for valence and to hide the workings of the shade. Slats generally are two inches deep, although some are only one inch deep. For deep window frames, mounting inside the frame is recommended. Slats are very thin, about an eighth inch thick. They can close tightly and provide insulation and full light control when closed.

The ecologically minded homeowners can use roller shades to save money and cut electrical bills. Adjusting the slats to allow bounce lighting is one way to multiply the amount of light entering a room. You can set the slats to reflect light either up against the wall or down on the flooring. Light colored ceilings multiply the light, sending rays around the rest of the room. This means you do not have to run electrical lighting as much during the darker hours of the day.

Using roller shades to keep hot sunlight out of a room can reduce air conditioning costs. Direct sunrays can heat up a room to over 100 degrees Fahrenheit, and actually can be used for passive heat in the winter, which is good. That is a time to have the window shades up and let that sunshine into the room. But, in summer heat, keep rooms cooler with your roller shades down.

The modern roller shades have advanced technology for the mechanisms used to raise and lower the window shades, so the homeowner does have better control for setting the level of the window shades, and it is easier to use. Some heavier wood roller shades even have motorization lift systems. All around, using roller shades fits right into an ecologically minded lifestyle very nicely.

Judith Persit is an interior designer focusing in window treatments. Judith writes about roller shades. Learn more about window shades at her internet site.

Article Source:http://www.articlesbase.com/diy-articles/environmentally-minded-buyers-can-have-results-with-window-shades-for-objectives-1084388.html

DIY plans may be located in publications such as woodworking,crafts and mechanical magazines to point out just a few. Recent magazines contain plans which are modern in design and up to date. Of course it is not at all likely that you will find any particular plan you are seeking. You will have to search back issues of the magazines to locate the plan you are after. Availability of the older publications will be a problem here. A good source for old magazines is likely to be your public library since many of them keep bound volumes of widely read magazines. You may be fortunate enough to find bound copies of publications from the nineteen fifties or even earlier dates. These magazines are a good source for older plans.

Magazines published earlier than 1964 are very nearly all copyright expired and their contents are in the public domain at the present time.  Material which is in the public domain can be reprinted freely by anybody and used for any purpose whatsoever with no restriction. Before 1964 US copyrights were for only a 28 year period. The copyright must be renewed during the 28th year or it was terminated and the publication entered into the public domain.  Renewal of the copyright was not possible after the 28 year period. As a result public domain material cannot be copyrighted either by it’s author,  the publisher or anyone else. Periodicals usually published this kind of material only once so they did not renew the copyright when it expired. The publication then entered the public domain. Magazines published before 1964 are almost all in the public domain so the content can be used by anyone in any way they like.

Some such magazines include Science and Mechanics, Mechanix Illustrated, Popular Science and Popular Mechanics  to name a few.  This is the reason why plans from these older magazines are to be found on the web either free or for sale. The greatest problem for anyone searching for a certain plan is to find a copy of the old magazine which contains a suitable plan.  This may be difficult to do and it is usually much simpler to buy a copy of the plan,  for a few dollars,  rather than spend much time looking for a free copy.

Would you like to see many more free DIY tips and info? Would you like to see a source for hundreds of vintage DIY plans? Just check out my blog at http://blogs.ebay.com/cannyscotsman/entry/Febreeze-Odor-Remover-Make-Your-Own/_W0QQidZ1066559013 and see my store at
http://stores.shop.ebay.com/Books-Plans-and-Prints-4U__W0QQ_armrsZ1

Article Source:http://www.articlesbase.com/diy-articles/do-it-yourself-plans-diycreate-the-items-you-need-1073809.html

I get calls every week from clients who want to install pivot hardware to hang their doors (and sometimes other items like bookcases and even refrigerators). Using pivot hardware can serve several different criteria on a job site such as aesthetics or perhaps because a door is too heavy, tall or wide or maybe just because the owner is looking to do something different or less common than hinges.

In my experience there seems to be a general lack of understanding of the use and application of pivot hardware by many home owners, contractors and even architects. Most of the time this is where the knowledge of the hardware professional is indispensable and can help save money, aggravation and even delays on projects. But first we must define pivot hardware (or sometimes called pivot hinges).

There are two primary types of pivots used in commercial / residential construction

a. Offset Pivots

b. Center Hung Pivots

The selection of the proper pivot hardware for a given application can best start with asking a simple question.

The first question I most commonly ask is whether a door is single acting or double acting. A single acting door is one that swings open in one direction only. Typical single acting doors are classroom doors and bedroom doors. Double acting doors swing open in two directions. Typical double acting doors are seen in restaurants where the door to the kitchen can swing “in and out” so as to better allow people to move into and out of the kitchen with a try full of dinner plates.

We can easily eliminate offset or center hung pivot based on the answer to the above question. If a door is single acting, then both offset and center hung are still possible candidates. But if the door is double acting, then we can absolutely eliminate offset pivots. So lets move forward with a better definition of center hung pivots.

Center Hung pivots are unique and allow for a special set of design criteria for a doorway to be met. These pivots should be considered when a client wants the hardware to be concealed as much as possible or when a doorway is double acting. Center hung pivots are mortised into the bottom and top of the door generally centered in the door in relationship to the thickness and typically about 3/4″ from the pivoting edge of the door to the center of the pivoting axis. This makes the pivot hardware very nearly completely hidden when the door is closed.

Also because the axis of pivoting is in the center the door can be accommodated to double act if the application calls for it. A typical double acting door can been seen in a hospital room bathroom. The pivot hardware on these doors is center hung. Typically this bathroom door swing in but in the event of an accident (such as a patient collapsing) the nurse can, by disengaging a special strike plate, swing the door out into the room to allow access.

Center hung pivot hardware is available for doors less than 100 lbs. as heavy as up to 1,000 lbs., range from just over $100.00 to well over $1,000.00 dollars, are available is most sprayed and architectural plated finishes and made by many manufacturers such as Rixson, ABH, Ives and Dorma.

The following are a few considerations when specifying or using center hung pivots.

a. Center Hung pivots are not for use of fire rated doors

b. May violate the warranty of the door manufacturer

c. Typically require a radius edge to one or both stiles of the door.

d. Can be used on single or double acting doors but the way a door is machined depends on this.

Now moving onto offset pivots and back to our first question weather or not a door is single or double acting. Again if it is double acting then offset pivots are not an option. But if the door is single acting the then offset pivots are required.

Offset pivots can be specified for a number of reasons but the most common are weight of the door and the design criteria set forth by the owner. Offset pivots have a much higher weight capacity than hinges and can be considered the best possible means of hanging a door. Because the weight of the door is born exclusively on the bottom arm of the pivot (which is directly connected to the pivot spindle) the weight of the door itself is carried by the floor (and ultimately the remainder of the building).

Offset pivots are visible at the top and bottom of the door and are generally only slightly more difficult to machine in doors than center hung pivots.

Offset pivots are named such because the vertical pivoting axis is “offset” from the face of the door. There are two common offsets, 3/4″ and 1 1/2″. 3/4″ is by far the most common. This means the distance from the face of the door to the pivoting axis is 3/4″. 1 1/2″ offset is also not uncommon but are generally only used when the the doorway requires a greater offset such as thicker than standard casing or when a door is set deeper into a jamb than normal.

Typical applications for offset pivots are wardrobe closets or lead lined doors in hospitals and clinics. And like its cousin center hung pivots, offset pivot hardware made made for doors as light as less than 100 lbs. as heavy as up to 1,500 lbs., range from just under $200.00 to well over $1,000.00 dollars, are available is most sprayed and architectural plated finishes and made by many manufacturers such as Rixson, ABH, Ives and Dorma.

The following are a few considerations when specifying or using offset pivots.

a. Offset pivots can be used on fire rated doors

b. Intermediate pivots can be specified so as to not violate the warranty of the door manufacturer

c. Do not require a radius edge to either stile of the door.

d. Can be costly depending on the size and weight of the door they are installed onto.

I enjoy talking about pivots, their general and less common uses and helping people determine the right pivot for their application.

I have been working in the commercial construction materials business for 20 – years with a family heritage dating to the 1930’s distributing quality building materials to the construction industry. As an owner for the last 15 – years I have gained an expert working knowledge of commercial doors and architectural hardware with a strong emphasis on client relations both face to face and at www.absupply.net

Article Source:http://www.articlesbase.com/diy-articles/pivot-hardware-use-and-selection-guide-1071282.html

Why is wind power important?
Wind power makes sense in these times when the demand far exceeds the supply. The convention ways of producing electricity make use of the non-renewable fuels, not only making such resources scarce but also affecting the environment negatively. The power generated by wind proves beneficial in the following ways:

• Free source of energy – The wind power makes use of wind energy which is absolutely free, thus saving the non-renewable sources of energy for longer.

• No environmental hazards – The generation of wind power is extremely environment-friendly. It does not emit harmful gases nor does it have any other environment-damaging impact.

• Cost-effective – Using a free energy makes wind turbines extremely cost-effective. Moreover, there remains no worry of sky-rocketing electricity bills.

• 24/7 uninterrupted supply – The wind power ensures that you never have power outages in your house and farm.

• Self-dependent source – Making use of wind power makes you independent. You no longer depend on the government and its agencies for power.

How can we make power from the wind?
A wind turbine is employed to make use of the abundant wind energy. A wind turbine converts wind energy into mechanical energy for mechanical work. Such a wind turbine is generally referred to as a windmill. A wind generator is a wind turbine that further converts the mechanical energy into electrical energy.

A wind turbine typically consists of blades, a tower, a shaft, a base, and a generator. The blades of the wind turbine rotate in the wind to generate mechanical energy. The two pre-requisites for installing a wind turbine are a large area of at least one acre and an average wind speed of 11 miles per hour.

What are the uses of wind power?
The uses of wind power are many. Let’s look at some of the popular ones:
• Running all possible electrical and electronic appliances
• Pumping out water
• Grinding grains and stones

By employing a wind turbine at your home or farm, you definitely make the world a better place. The wind power is a green solution to the power crisis. It does not harm the environment in any way. Moreover, it does not make use of any fuel, thus promising a future of no power-crisis.

Wanna know how i built mine below $200? Please visit http://honestcriticalreview.blogspot.com

Article Source:http://www.articlesbase.com/diy-articles/making-wind-power-1067984.html

If you’re tired of wasting money and you are interested about how to adjust your electric bills to cost you nothing then by all means listen to what we have to say – you are sure to find it extremely helpful. Most people depend on profit-making companies for all their energy needs; but there is a little-known system that enables you to get free and unlimited power supply amazingly easily and yes, inexpensively.

You may raise an eyebrow at this claim, but let me assure you that even the average person can easily generate plenty of power for their personal needs and those of their family, and no longer be a victim of price-gouging energy suppliers. All this is possible – never again wasting your hard-earned money on an essential need – nothing but unrestricted, clean energy for your entire household.

Just before you search the internet for more information about how to adjust your electric bills to cost you nothing; it is very important that you hear the exciting news that you can get on board with a system used by a great number of citizens of the united states and indeed of the world that gives you the power to seriously decrease your power bill if not eliminate it once and for all! You are no doubt starting to wonder what sort of method is involved; it’s just a matter of taking advantage of existing resources – taking natural energy sources and transforming them into electricity, in your own backyard, and in just a couple of days – all by yourself. Just when you thought it couldn’t get any better – it’s easy to do, even in the case you are not ‘handy’ and although you probably haven’t studied the field of electricity.

So while you continue educating yourself about how to adjust your electric bills to cost you nothing, here’s the best part of this article – with this new energy solution, you are using clean earth-friendly energy and on top of that, with tax credits and by selling extra power to your electric company, you can save money, and even make money! Take a moment to see yourself turning on your air conditioner or your heaters as desired without a thought about cost, and having extra money in your wallet for being good to the environment. Too good to be true? Don’t be sorry you missed out – check it for yourself; I am sure it’ll shock you as much as it shocked me.

Enjoy FREE and UNLIMITED electricity…forever!



Watch this SHOCKING Video!



Visit: EasyFreeEnergy.com

Article Source:http://www.articlesbase.com/diy-articles/adjust-your-electric-bills-important-notice–1063927.html