How to Build a Vegetable Greenhouse
Of numerous greenhouse types, the Dutch-light house is popular for growing tomatoes and all those crops such as winter lettuce which require the maximum amount of light. This type of house is used mostly without heat, though soil warming equipment will enable earlier crops to be grown. The house is usually constructed on a brick base of 3-4 courses and each light, composed of a single sheet of glass, is clipped into position, the sides having a gentle slope to allow for maximum light penetration. Made of aluminium or cedar wood, the house is quickly erected and is equally quickly dismantled to move elsewhere as required. If two bases can be prepared, it will be possible to alternate their planting with tomatoes each year so as to allow the ground beds a period of recuperation from their exposure to the elements. The lights may also be used as frame lights if so desired. With the Crittall-Hope house and others, a sliding door with finger-tip control gives easy access and additional ventilation, whilst wind damage is reduced to a minimum. No glazing is required, the lights being sent out complete and ready for erecting sectionally.
Several makes of the Dutch-light houses are supplied with a portable concrete base which may be laid directly on to the ground and the house erected over the base, there being no need for tedious brick laying. Or the house may he erected on old railway sleepers which, like the concrete blocks, may be moved about the garden if the house is being used to cover various crops growing in the open.The more conventional greenhouse with a brick or wooden base extending to a height of 1 feet and with glass sides extending for a further 3 feet before meeting the roof, will require less heat to maintain a temperature similar to that of a Dutch-light house and will enable a wider range of horticultural activities to he performed. Tomatoes and cucumbers may be grown at the back, planting them in deep boxes or pots and first training them in an upright direction, then to the top of the roof whilst other crops may be grown at the front of the bench, or seedlings raised for a considerable time when heated and even after turning off the heater, there will be no rapid fall in temperature as there is with air heating. The use of soil warming wires in a heated greenhouse will enable the air temperature to be reduced to a minimum whilst keeping the plants growing by gentle bottom heat. Where a hotbed cannot be made from manure, electric soil warming is a reliable substitute.For raising seedlings and striking cuttings, a sand propagating frame may be made in a cold greenhouse by using either low voltage or mains warming cables. A wooden box is made with 9 inch boards, the base being covered with felt. Over this is placed a 2 inch layer of washed sand before laying down the warming wires which ;1 re covered with a further 3 inch layer of sand on which the seed boxes or pots are stood; or cuttings (to be rooted) may be inserted directly into the sand. $ watts per square foot of bed should be allowed, whilst a soil thermostat is necessary to control the temperature of the bed.
Owner of MishoBonsai, he has been practicing bonsai for over 10 years. Found a distinct interest in propagation, especially bonsai. Mishobonsai sells tree seeds and provide bonsai tree information for beginner to advanced bonsai enthusiast. Mishobonsai sells tree seeds from tropical, deciduous and evergreen species. Many bonsai specific species growing guides and general bonsai tree information articles. Article Source:http://www.articlesbase.com/diy-articles/how-to-build-a-vegetable-greenhouse-1027530.html
10 Easy Do-It-Yourself Tips to Build a Wine Rack
Do you like Do-It-Yourself (DIY) projects? If so, then construct your own wine rack. It provides you with an easy way to store and display the various wines that you have. Also, building it is probably much easier than you might expect. Furthermore, DIY projects can save you a ton of money, which you could dedicate to increasing your selection of wines. Here are the simple tips to build a rack:
1. Choose the size of the wine rack that you want to build
Wine racks can range in size. They can be small enough to fit on a wall in your home. Mid-size win racks fit easily onto areas such as your kitchen countertop. Meanwhile, larger racks sit on the ground, as a bookshelf would. This type of wine rack can store the greatest number of bottles.
2. Create a wine rack that holds the bottles horizontally
Why is this important? There are a few benefits. Firstly, this helps to keep bits of debris from entering the bottle’s neck. Also, keeping the bottles horizontal will ensure that the bottle’s cork will remain wet.
3. Construct a wine rack that is a minimum of 7 deep.
You may consider buying wall racks if you struggle with DIY projects. If not, remember that the deeper it is, the less the bottles will protrude from the wine rack. This will make the rack sturdier.
4. Select certain slots to accommodate a high number of bottles
After deciding on how many bottles you want to store, determine which type of slot you want to use. The two best types are the flat-box slot and the diamond-slot. These types of slots are ideal, as you can hold many bottles in a single slot. If you are trying to maximize the number of bottles you can squeeze into a small space, then these types of slots are ideal.
5. Consider slots large enough for a single bottle, for convenience
If you want to access your wine bottles easier and faster, then take this step.
6. Screw holes before installing screws
Do this to avoid cracking the wood of the wine rack, as you drill holes into it.
7. Consider buying a wine rack if necessary
If you lack the time to build your own rack, then consider buying it. These racks are available in a wide variety of styles, sizes, and bottle capacities.
8. Verify that your wine rack is sturdy
In particular, when creating slots for multiple bottles, ensure that the rack can support full bottles’ weight.
9. Use the right wood if the wine will sit in a cellar
This will prevent the wood from experiencing rotting, mildew, etc.
10. Add slots in your wine rack, for glasses
This will further serve as a space-saver.
One of the most practical wine racks remains a wall decoration one. However, if you are a DIY fan, then build your own wine rack!
Article written by Alyssa Davis. Find distinctive wall art products at low prices with Metal-Wall-Art.com. Shop for wall art decor and metal wall plaques. Article Source:http://www.articlesbase.com/diy-articles/10-easy-doityourself-tips-to-build-a-wine-rack-1025640.html